Bezel Setting

When it comes to mounting a single stone, the bezel setting is one of the most common ways of doing so. When compared with a prong setting, which is another popular option, the bezel setting partially or fully surrounds the stone whereas the prong setting only holds the jewel in place with claws. Because of this, the bezel setting is more protective of the stone. 


If you have an active lifestyle, this is definitely the setting for you. It is also a good option if the stone you have purchased is flawed or chipped in any way, as the bezel setting will be able to mask this, allowing you to go for a cheaper diamond. Another benefit associated with this setting is that the stone is better protected from soap and dirt, elements that can lower the stone's shine. The ring is a lot less likely to snag skin or clothing, as the edges of the stone are smoothed by the bezel.


Nevertheless, there are a couple of things you need to bear in mind if you opt for this setting. Firstly, this can be one of the more expensive options, especially when the setting is made from a precious metal, for example, white gold or platinum. Moreover, every stone is different, and this means that the setting needs to be bespoke to the stone. 


When buying a clear stone, like a diamond, it is worth considering a half bezel. This is because a full bezel will hide the lower half of the stone, and this means that natural light is not able to deflect as well as it typically would. This can have a detrimental impact on the sparkle of the diamond. Instead, a half bezel is when the setting has been divided into two or more sections, which results in only portions of the stone being covered. This enables there to be a greater level of visibility of the diamond that is within, creating a higher level of sparkle.


The bezel setting is not only popular for engagement rings, but it is also widely used to enclose softer gemstones, such as fluorite, turquoise, and opal, which tend to be prone to scratches and other forms of damage because they are not as resilient.